Star Bubinga Australian Acacia 7pc Shell Kit
Made in Japan, the flagship STAR series draws upon the knowledge gained from decades of TAMA’s expert craftsmanship, and reexamines every detail to enhance shell resonance. The lineup includes the most unique Bubinga, Maple, and Walnut woods the world has to offer.
STAR is the new flagship line for TAMA drums. It takes the knowledge and research we cultivated for the Starclassic series to the next level, by reexamining every detail to enhance shell resonance.
STAR Bubinga features a much thinner shell than Starclassic Bubinga. In addition, every shell comes equipped with 9mm thick Sound Focus Rings (SFR) for structural support. This shell configuration provides clear projection and resonance to highlight the distinct sound of Bubinga.
Highlights
- Bubinga Shells
- Hold Tight Washers
- Die Cast Hoops
- Minimum Shell Contact
- Quick Lock Tom Brackets
- Super Resonant Mounting System.
Specifications
- 22×14 kick
- 14×8 Snare
- 8×6 Rack Tom
- 10×7 Rack Tom
- 12×8 Rack Tom
- 14×12 Floor Tom
- 16×14 Floor Tom
5mm, 5ply Bubinga + 1 inner ply Cordia, or 5ply Bubinga + 1 outer ply Australian Acacia + 1 inner Ply Cordia for SAC/PBA, or 4ply Bubinga + 1 outer ply Indian Laurel + 1 inner ply Cordia for LNTI, or 4ply Bubinga + 1 outer & 1 inner ply Cordia for CDKG/CDKR, w/ 9mm Sound Focus Rings
Bubinga wood, which TAMA introduced to the market, has become increasingly popular as a drum shell material. Because of their ultra-high density, Bubinga shells provide rich, fat low end as well as deep, dark tones.
STAR Bubinga shells are crafted to be much thinner than their Starclassic counterparts. All the shells are 4.5mm thick, including the bass drums and snare drums. These thinner shells allow the Bubinga material to vibrate more freely, which greatly enhances resonance. All STAR Bubinga shells feature 9mm thick Sound Focus Rings (SFR), which provide clear projection and sustain for a distinct sound, as well as reinforcement.
Tom Toms & Floor Toms: REMO® Coated Ambassador for Batter Side / REMO® Clear Ambassador for Bottom Side
Bass Drums: REMO® Coated Powerstroke 3 for Batter Side / REMO® Fiberskyn Powerstroke 3 Diplomat for Front Side
Snare Drums: REMO® Coated Ambassador for Batter Side / REMO® Snare Ambassador for Snare Side
Hold Tight washers are designed to prevent the tension rods from loosening. They consist of a cup-shaped stainless steel washer which contains a rubber ring.
Vibration caused from striking a drum creates space between tension rods and hoops, which can cause the tension rods to loosen over time. The rubber rings on our Hold Tight washers help absorb the impact of vibration and keeps tension rods in constant contact with the hoops to prevent loosening.
Hoops are a crucial element to a drum’s sound and ease of tuning. STAR drums feature die-cast zinc hoops, which are manufactured by injecting molten metal into molds. Die-cast hoops are denser and more consistent in shape than triple-flanged hoops, which are manufactured by bending metal plates.
Sonically, die-cast hoops provide crisper attack, greater projection and a more focused and powerful tone. Die-cast hoops also make tuning easier and keep drums in tune longer because of their density and consistency in shape. These hoops combine with the rich, resonant STAR drum shells for a very well-balanced, full-bodied sound.
Every piece of hardware that is attached to shells affects the resonance and sound of the drums. In developing the STAR drum line, every detail was carefully considered to maximize resonance and optimize sound.
The newly designed lugs for STAR drums have a luxurious, sophisticated look, as well as an extremely low mass bridge construction for minimum shell contact. The bass drum claw hooks follow the same principle by “floating” on the surface of the bass drum hoops. STAR drums also feature an imprinted badge and small wooden air hole grommet which further reduce the weight of materials on the shell and improve resonance and sound.
There is one more important consideration. Most bass drum spurs have metal spikes at the end to prevent slippage while playing. This is an important feature for many drummers, so to achieve the same impact absorption principle while using metal spikes, STAR bass drum spurs feature a unique 2-piece construction. The spike is separated from the rest of the spur by rubber, which absorbs the impact without transferring it to the spike itself, allowing the bass drum shell to vibrate and resonate more freely.
Playability is also one of the key elements we considered in crafting the high-end STAR drum line. This hollow, soft rubber construction on the floor tom legs also provide a very comfortable feel and response when striking the drum.
First and foremost, as their name suggests, these brackets allow for quick and easy setup and breakdown. But the real unique feature of these brackets is that once the drum is positioned on a tom stand or floor tom legs, there is no need to attach and adjust separate memory locks to save the setting. By simply sliding the switch on the tom bracket, the bracket separates into two parts. When the drum is removed for breakdown, the “memory lock” portion remains on the tom stand or floor tom leg. This saves your positioning and makes the next set up quick and easy.
These Quick-Lock tom brackets have some hidden acoustic benefits as well. Following the same principle of reducing vibration transference from drums to the tom stands or floor tom legs, these tom brackets also employ rubber lining to further isolate the drums and enhance resonance.
This mounting system has three contact points with the drum. Two are located on the batter hoop (A & B), and one is located on the bottom hoop (C). These three points create the largest possible theoretical triangle on the drum. The two contact points on the batter hoop (A & B) support the weight of the drum vertically. The third contact point (C) supports the horizontal weight of the drum, once the angle is set. According to physics, the further this third point is located, the less support it requires when setting an angle. Therefore, by placing the third contact point as far as possible on the bottom hoop, using the support arm, we were able to dramatically reduce the stress and strain on the shell and hoop and increase natural resonance.
If you tilt your drums beyond a certain angle, which should only apply to a small minority of drummers, this mounting system operates a little differently. If a drum is titled beyond a certain angle, the bottom hoop will no longer be in contact with, or supported by, the bottom contact point (C). In that case, a different contact point (D), located on the batter hoop, comes into play. Although the triangle formed by these three points is much smaller, it does not put more strain on the batter hoop because of the angle of the drum. So the drum’s natural resonance is still preserved in this case.
To maximize the resonance of drums, it’s very important to prevent the vibration of the shells from transferring to the tom stands. Therefore, in addition to the engineering outlined above, we also utilize rubber at each contact point between the shell and the mounting system, which helps to isolate the shells and greatly reduces the vibration transference.
In a very time consuming process, the bearing edges and insides of all STAR drum shells are meticulously hand finished with oil for a luxurious look. STAR Bubinga shells feature an oil-finished inner ply of Cordia, while STAR Maple drums feature oil-finished Maple interiors
STAR drums feature a bearing edge shape as shown in the diagram. Its peak is rounder than TAMA’s traditional bearing edge. This rounded peak provides more contact between the drumhead and shell, allowing vibration to travel from the drumhead to the shell more efficiently. Also, the peak position of the edge is 3.5mm from the shell’s outer surface, which further improves contact between the drumhead and drum.
Professional packing and fast shipping
Through our long-term relationship in a long-standing partnership with UPS, FedEx, DHL and many other top global carriers we can offer various shipping options. Our warehouse staff is highly trained to pack your goods precisely according to the specifications we provide. Your items will go through an exhaustive examination before they will be safely packaged prior to being shipped. We ship to thousands of customers every day across various countries. Our dedication to becoming the largest online retailer in the world is shown by this. The warehouses are located located in Europe as much as they are in USA.
Note: Orders that include more than one item are assigned a processing time depending on the item.
Before shipment, all ordered items will be thoroughly examined. The majority of orders are shipped within 48 hours. The time to deliver varies from 3-7 days.
Returns
The inventory is constantly changing and we cannot fully manage it due to the fact that several parties are involved, including our warehouse and factory. Stock levels can fluctuate at any time. It is possible that the stocks could be depleted after your order has been processed.
Our policy is valid for a period of 30 days. We are unable to replace or refund your purchase if it has been 30 days since the purchase.
You are able to return an item if it is unused and still in the same condition as the day you received it. It should also be in its original packaging.
Related products
Drum Accessories
Percussion Accessories
Acoustic Drum Kits
Franklin Drum Company Maple 3pc Shell Kit 13/16/24 – Champagne Mod Franklin Drum Company
Acoustic Drum Kits
Ludwig Breakbeats 2022 By Questlove 4-piece Shell Pack with Snare Drum – Blue Sparkle Ludwig
Percussion Accessories
Drum Accessories
Drum Accessories
Acoustic Drum Kits
Acoustic Drum Kits
Ludwig Classic Oak Fab 22 3-piece Shell Pack – Tennessee Whiskey Ludwig
Acoustic Drum Kits
C&C Drum Co Player Date II Big Beat Shell Pack – Turquoise and Black Pearl C&C Drum Co
Drum Accessories
